Patch instructions
1- Garments should be clean.
2- Heat the iron to the hottest setting.
3- Thoroughly iron the area or garment where the patch will be placed.
4- Place the patch on the garment, embroidery facing up.
5- Place a cloth or light towel over the patch and using a slow circular motion, press firmly for 30 seconds.
6- Turn the garment inside out, and iron the back of the patch for 30 seconds.
7- Let cool for one minute. If the edge of the patch can be lifted, repeat steps 5 and 6
(Performance of application Guaranteed by sewing)
IMPORTANT DO NOT USE ON: un-ironable fabrics ( low melting point) Such as nylons, vinyl, or leathers.